PWC Boat Lifts

Self-Floating PWC Lift

Roller Aided
Boarding and Launching
Heavy-duty Stoltz brand Super Rollers aid in docking and launching by allowing the PWC to roll on and off board. Polyurethane rollers with stainless steel and solid brass hardware won't corrode, develop flat spots or mar the hull's finish.

EZ Port II
Adjustable rollers
EZ Port model two and three's adjustable center roller makes it simple to adapt it specifically to your craft. Position the roller in either of two trays in two different configurations to achieve four heights. Add an additional roller if desired.

Lower Tray,
axle down

Upper Tray,
axle down

Lower Tray,
axle up

Upper Tray,
axle up

Anchor to any dock, floating or stationary
A wide variety of anchoring hardware is available to use EZ Port with the complete EZ Dock system, or other types of docks.

Anchor to the EZ Dock System with our Coupler assemblies.

Anchor EZ Port to ordinary floating docks with our hinge kit

Anchor to a stationary pier with a pair of pipe brackets and stand-off brackets.

A. Original EZ Port

Recommended for PWCs up 625 lb. gross weight.

C. Original EZ Port with extension

Recommended for PWCs up 725 lb. gross weight.

B. EZ Port II

Recommended for PWCs up 800 lb. gross weight.

D. EZ Port II with extension

Recommended for PWCs up 900 lb. gross weight.

There's an EZ Port model that's right for you.
The EZ Port configurations shown are estimates based on PWC gross weight, including fuel, oil and cargo. Estimated weight recommendations are intended to keep the PWC above the waterline. Amount of freeboard will vary depending on the PWC's weight and option used.

E. EZ Port 3

Recommended for PWCs up 1300 lb. gross weight.

Specifications Construction: Linear-low density polyethylene with UV stabilizer. Minimum thickness of 5/16", up to 3/8" thick in high impact areas. Color: light beige.
Original EZ Port 118" long, 59" wide, 15" high Section weight: 230 lbs. Approx. gross load capacity: 625 lbs. Rollers: 1 fixed stern roller Part#: 206010PW
EZ Port II 127" long, 59" wide, 15" high Section weight: 240 lbs. Approx. gross load Capacity: 800 lbs. Rollers: 1 fixed stern roller, 1 adjustable middle roller Part#: 206011PW
EZ Port 3 151" long, 59" wide, 15" high Section weight: 280 lbs. Approx. gross load capacity: 1300 lbs. Rollers: One fixed stern roller, Two adjustable middle rollers Part#: 206013PW
20" Extension 20" long, 59" wide Section weight: 50 lbs. Buoyancy: Offers the same p.s.f. load capacity as the EZ Port units. Extension adds approximately 100 lbs. of load support to Original EZ Port and EZ Port II. Rollers: 1 stern roller Part#: 206010EX